taylor_inner_pumps

Rainwater pumps Adelaide

To provide water pressure from your tank to enable you to use a hose, an irrigation system or plumbing into your home you’ll need a rain water pumps Adelaide. Taylor Made Tanks supply a wide range of pumps from the major manufacturers including Grundfos, DAB and Bianco.

Correct rainwater pumps in Adelaide selection is critical in how your rain harvesting system operates. We’ll advise on the best pump for your use including quiet submersible systems. We even have set and forget systems for plumbed in installations that automatically switch between mains and rainwater as your tank level varies.

Filtration

Almost every rainwater tank system can benefit from the addition of a filter.

We install a wide range of filters specifically designed for rainwater use. From whole of home silver carbon systems and under sink filters through to simple sediment filters to prevent blocks in your irrigation system. Talk to us today about your requirements and intended water use.

Leaf eater rain heads

Probably the most important accessory you can install in your rain harvesting system is a leaf catcher or leaf eater.

Most commonly installed at each down pipe that’s connected to your tank a leaf eater will stop leaves and larger debris from entering your tank. We have a wide range of models available to suit different gutters, heights and installations. A must have low cost accessory for your rainwater tank.

First flush diverters

A first flush diverter is an essential part of any quality rain harvesting system. They will remove the first flush of dirty water coming off your roof and gutters preventing dust, dirt and animal droppings from entering your rainwater tank.

Simple inline first flush diverters can be mounted at each downpipe for systems with multiple hookup points or at the rainwater tank itself. For larger wet systems we have in ground first flush diverters available. We’ll help select the best model to use in your rain harvesting project.

Tank level gauges

You can’t always rely on tapping on the side of your tank to check its level.

We have several different types of level gauges available. You can have a simple low cost dial gauge that uses a float in your tank to display the water level or a an electronic water level gauge that transmits the water level to a digital readout on an indoor display.